Bradley
  L  A  W  N    A  N  D    G  A  R  D  E  N    B  U  I  L  D  I  N  G  S
 


Value 
Added 
Options
for Wood
Buildings


  
Take 10% off all options
when purchasing a building. 
Excludes concrete and insulation.

 

  

Value Added Options Wood

CONTACT INFORMATION:


Telephone Your Personal Bradley Pro

Hours: 8:00 AM to 6:00 PM Monday through Friday. Closed weekends. Leave a message anytime.
   
Tel:   Your telephone and contact information goes here.

Sales@BradleyBuildings.com

   

 

   
 

OPTIONS LIST

 

Octagon Window

Wood Window
Install Customer's Standard Size Window ea 91.00
Octagon Window 22"x22" Natural Wood ea 178.00
  Windows Vinyl
Windows Include 1"x4" Exterior Wood Frame and Screen
New Construction Tilt-Down Double Insulated. Fusion welded vinyl construction. Will not blister, peel, flake, rot or corrode and never needs painting.
24"x36" Utility Size (White) ea 163.00
30"x30" Utility Size (White) Special Order ea 195.00
32"x48" Home Size (White) ea 251.00
32"x30" Utility Size (White) Special Order ea 191.00
32"x44" Dormer Size (White) Special Order ea 215.00
32"x62" Home Size (White) Special Order ea 250.00
32" x 72" Picture Window (White) Special Order ea 285.00
36" x 36" Window (White) ea 239.00
32"x38" Bath or Kitchen Size (White) ea 218.00
36"x52" Home Size (White) ea 251.00
36"x62 Home Size (White) ea 262.00
36"x72" Picture Window (White) Special Order ea 317.00
48"x48" Slider Window (White) ea 285.00
60"x48" Twin Window (White with grids) Special Order ea 699.00
Install Customer's Window (None Standard Sizes Extra) ea 83.00
  Exterior Doors Steel
Doors are Primed and Ready to Paint. Locksets are not Included. Note: Add 15% to doors that will go into a 2x6 studded wall.
6 Panel Steel Insulated Door 32" or 36" Wide ea $ 238.00
36" Steel Door with 9 Lites (i.e., 9 Panes of Glass) ea 360.00
36" Steel Door with 15 Lite Pattern  ea 359.00
French Doors 6' Wide. Full Glass (1 Lite Pattern) ea 578.00
French Doors 5' or 6' Wide. 6 Panel Steel (No Glass) ea 578.00
French Doors 5' or 6' Wide. Flush Steel (No Glass) ea 590.00
French Doors 5' Wide. 15 Lites ea 630.00
French Doors 5' Wide. 9 lites ea 598.00
French Doors 6' Wide. Full Glass with Built-in Blinds ea 897.00
  Garage Doors
 Standard Height
Standard Doors 7' in Height (For Automobile or SUV)
Aesthetically Pleasing Design with Rectangular Raised Panels. Restricted to Models Equipped with at Least 8' of Headroom. Note: Pricing is for customers within the metro Atlanta service area. Customers outside of this area are asked to contract their doors through a local concern. Backed by one year parts and labor warranty to include free adjustment. Also includes a limited lifetime warranty against splitting, cracking, and rust through. for photos and additional information.
SIZE Solid Glass Insulated/
Solid
Insulated
w/Glass
Doors 7' in height. Accommodates cars, SUV's and most vans.
  8x7 $  503.00 $  576.00 $  614.00 $  756.00
  9x7 526.00 601.00 650.00 800.00
10x7 567.00 656.00 711.00 893.00
12x7 788.00 895.00 978.00 1,087.00
14x7 911.00 1,005.00 1,075.00 1,275.00
16x7 877.00 1,029.00 1,099.00 1,393.00
*18x7 1,045.00 1,197.00 1,225.00 1,474.00
*Door requires wall height of at least 9' in order to accommodate LVL beams which are used in lieu of double headers.

Doors 8' in height. Accommodates vehicles that require additional clearance, as a truck with roof lights.

  8x8 608.00 692.00 722.00 864.00
  9x8 644.00 704.00 765.00 906.00
10x8 677.00 770.00 790.00 982.00
12x8 917.00 1,023.00 1,135.00 1,250.00
14x8 1,040.00 1,185.00 1.245.00 1,451.00
16x8 1,045.00 1,191.00 1,256.00 1,455.00
*18x8 1,191.00 1,243.00 1,432.00 1,662.00
*Door requires wall height of at least 9' in order to accommodate LVL beams which are used in lieu of double headers.

Doors 9' in height. Accommodates vehicles that require additional clearance.

  9x9 653.00 711.00 770.00 828.00
10x9 682.00 783.00 812.00 884.00
12x9 738.00 825.00 894.00 981.00
14x9 916.00 1,017.00 1,098.00 1,199.00
16x9 982.00 1,126.00 1,189.00 1,334.00
Doors 10' in height. Accommodates vehicles and boats that require additional clearance.
 9x10 916.00 988.00 1,059.00 1,130.00
10x10 1,012.00 1,091.00 1,170.00 1,249.00
Doors 12' in height. Accommodates most 5th wheels.
12x12 1,336.00 1,432.00 1,576.00 1,659.00
14x12 1,635.00 1,746.00 1,938.00 2,013.00
16x12 1,928.00 2,087.00 2,234.00 2,538.00
Doors 14' in height. Accommodates Class A RV's.
12x14 1,577.00 1,685.00 1,849.00 1,918.00
14x14 1,810.00 1,921.00 2.121.00 2,233.00
16x14 2,366.00 2,524.00 2,721.00 2,879.00
Frame out and trim garage door supplied by customer. 
8', and 9' widths                                                              ea     $ 75.00
10', and 12' widths                                                          ea     $100.00
14' and 16' widths                                                           ea     $150.00
Note: A small travel charge may be necessary when installing garage doors more than 100 miles from Atlanta.
Dismantle one old garage door and opener and dispose of same.  ea. 65.00
  Garage Doors
Carriage House
CS Series Designer Carriage House Door. Includes Hardware
Other sizes are available. Please Ask for a Quote.
SIZE CS Series Insulated/
Solid
CS Series Insulated
w/Glass
 8x7 728.00 884.00
 8x8 832.00 1,053.00
to see styles.
Door widths: 6', 8', 10', 12', 14', 16', 18', 20'
Door heights: 6' 6", 7', 7'6", 8'
Please call for pricing.
  Garage Doors
Carriage House
American Series Carriage Doors
Other sizes are available. Please Ask for a Quote.
SIZE American Series Insulated/Solid American Series
Insulated w/Glass
 8x7 1,186.00 1,315.00
10x8 1,754.00 1,854.00
12x8 1,852.00 1,989.00
to see styles.
Door widths: 6', 8', 10', 12', 14', 16', 18', 20'
Door heights: 6' 6", 7', 7'6", 8'
Please call for pricing.
  Garage Door Opener
Installed Price - Customer Responsible for Electrical Hook-Up 
Genie Screw Drive 1/3 Horsepower Opener with Two Remotes and Automatic Lights. Includes Wall Button.
for Additional Information.
ea $ 399.00
Additional Standard Remote  ea 26.00
Genie Keyless Entry - Intellicode keypad.  ea 52.00
Heavy Duty 1/2 Horsepower Opener for Insulated Doors with two Deluxe Remotes and Automatic Lights.  Includes Wall Button. ea 461.00
Add Switch to Wall Button to Turn on Lights Separately ea 50.50
  Roll-Up Metal Doors
Safety First Roll-Up Steel Door. Metro Atlanta area only.
5' or 6' Roll-up Door (White)
for a Photo.
ea $ 385.00
8' Roll-up Door (White) ea 407.00
  Ramps
Heavy Duty Pressure Treated Ramps. Built from 2"x6" Boards.
5'x4' or 4'x5' (Key: Length x width) ea $ 124.00
5'x5'  ea 156.00
6'x4' or 4'x6'  ea 150.00
6'x5' or 5'x6' ea 187.00
6'x6'  ea 255.00
8'x6'  ea 298.00
8'x8'  ea 397.00
  No Floor
Deduct the Bradley Floor When Building on Your Concrete Slab
8' and 10' Wide Models, Deduct Per Square Foot. SF $ -.95
12', 16' and 18' Models, Deduct SF (Width x Length) SF -1.52
  Concrete Slab
Bradley pours slabs, driveways, parking pads, ramps and stoops.
We will be happy to give you a quote.
  Extend Headroom
Downstairs 2x4 Studs
Increase 8' Sidewall to 9' Sidewall for Taller Ceiling Applications. Studs are 2"x4" spaced 16" on Center.
Note: As an option, upgrade regular 2"x4" studs to 2"x6" (16" on center). See next section.
T1-11 Siding. Price per Square Foot with 2"x4" Studs. (Width x Length).  SF 2.17
HardiPlank Lap Siding. Price SF with 2"x4" Studs. SF 2.84
Vinyl Siding. Price SF with 2"x4" Studs. SF 3.04
  Extend Headroom
Downstairs 2x6 Studs
Increase 8' Sidewall to 10' Sidewall for Garaging a Boat or Oversized Van or for Commercial Applications. Studs are 2"x6" spaced 16" on Center.
Note: As an option, upgrade regular 2"x4" studs to 2"x6" (16" on center).
T1-11 Siding. Price per Square Foot with 2"x6" Studs. (Width x Length).  SF 2.75
HardiPlank Lap Siding. Price SF with 2"x6" Studs. SF 3.80
Vinyl Siding. Price SF with 2"x6" Studs. SF 4.00
  Extend Headroom
in Barn Loft
Raise Bottom Rafter 2'. Added Headroom is 22".
Priced per linear foot of building (i.e., length). For example, a 24' building: 24 x $34.99 = $839.76. Note: A kneewall is not recommended, as it compromises the structural integrity of the roof. LF $  38.49
  Extend Headroom
in Alpine Loft (Saltbox)
Saltbox: Raise One Side to 8'  (Restricted to 24' Wide Model). 
HardiPlank Lap Siding. Priced per linear foot . LF $ 109.00
Vinyl Lap Siding. Priced per linear foot . LF $ 109.00
  Standard Loft
Sections
1/2" Plywood Floor. Joists 16" On Center. 4' Sections
10'x4' With 2"x4" Joists ea $ 110.00
10'x4' With 2"x6" Joists ea 144.00
12'x4' With 2"x8" Joists ea 161.00
16'x4' With 2"x8" Joists ea 188.00
  Heavy Duty Loft
Sections
3/4" Plywood Floor. Joists 12" On Center. 4' Sections.
12'x4' With 2"x8" Joists ea 210.00
16'x4' With 2"x10" Joists ea 322.00
  Tray Ceiling
18" High Tray Ceiling Added to Models with Commercial Trusses. Ideal When a Higher Ceiling is Required in Only One Section of a Room; for Example, Over a Pool Table.
5/12 to 7/12 Roof Pitch. Priced SF of Tray Area SF 3.45
8/12 to 12/12 Roof Pitch. Priced SF of Tray Area SF 4.03
  Shelving
Heavy Duty 3/4" Melamine Laminate Board (White Both Sides)
Laminate Board Shelving is Accented by a 1"x4" Natural Wood Trim Board on the Front (Ready to Stain or Paint). Supported by Sturdy Metal "L" Brackets.
12" in Depth: Priced Per Linear Foot LF $ 6.65
16" in Depth: Priced Per Linear Foot LF $ 8.22
  Workbench
Heavy Duty Kitchen Quality Counter Top to be Used as a Workbench (Choice of colors and designs)
Laminate Kitchen Counter Type Workbench Supported by 2"x4" Wood Framing. Includes built-in back splash. Sides are open.
24" in Depth: Priced Per Linear Foot up to 10' in Length
Sizes: 4', 5', 8', and 10'
LF 20.47
Add Backsplash on Both Ends. ea 8300
  Stairs
Specs: 2"x10" Treads, 2"x12" Stringers, 2"x4" Handrail, 2"x2" Safety Balusters. The following prices are for buildings with an 8' sidewall. Add 20% to the cost for 10' sidewall models.
36" Stairs either straight or with a middle Landing according to the type of building. ea 1,045.00
42" Stairs with Middle Landing (3 Stringers) ea 1,289.00
Add 2x4 boards on both sides to receive future drywall and trim boards.   ea FREE
36" Exterior Pressure Treated Utility Stairs with 3'x3' Top Landing and 36" Steel Insulated Entrance Door with 9 Lites. ea 1,518.00
42" Exterior Pressure Treated Utility Stairs with 42'x42' Top Landing and 36" Steel Insulated Entrance Door with 9 Lites. ea 1,771.00
42" Exterior Pressure Treated Stairs with Middle Landing, 42'x42' Top Landing, and 36" Steel Insulated Entrance Door with 9 Lites. ea 2,087.00
For buildings with a 10' sidewall, add 20% to these costs.    
Add an 8'x8' Deck with Handrail and Safety Balusters for a Sitting or Barbecue Area. ea 1,052.00
  Pull Down Staircase
Installed in Either Full or Partial Lofts
22.5" Attic Pull-Down Stairway (shorter 1"x4" Treads)
for a Photo.
ea 219.00
  Dormers
Prices Exclude Window.
Chancellor, Bainbridge, Windermere Models: 5' Wide Dormer ea 657.00
Ambrosia Model: 5' Wide Dormer ea 783.00
Alpine Model:  5' Wide Dormer ea 846.00
  True Overhang 
Includes Enclosed Aluminum Soffit with Ventilation
6" to 9" Overhang. Per running foot both ends and sides. LF 17.25
10" to 12" Overhang. Per running foot all sides. LF 16.10
  Partition Walls
Installed in Either Full or Partial Lofts
8' High Walls Down: 2"x4" studs 16" on centers LF $ 12.76
9' High Walls Down: 2"x4" studs 16" on centers LF $ 14.91
10' High Walls Down: 2"x4" studs 16" on centers LF 16.52
Loft Partitions: 2"x4" studs 16" on centers. Note: Due to the loft angles and special cuts required, the cost per linear foot is higher. LF 17.49
  Lean-To Roof
Lean-To Roof for Outside Storage or Carport. Priced per square foot (SF)
Attached to Roofline of Building. 4"x4" Pressure Treated Posts in Concrete, either 2"x4" or 2"x6" Rafters 24" on Center, 1/2" Pressure Treated Plywood Roofing, and 25-Year Shingles with Felt. Important note: The width of either the lean-to or porch is decided by the length of the rafter. Hence, an 8' lean-to, due to the angle of the roof, yields a usable width of about 7'; a 10' yields about 9', etc. Moreover, since the lean-to or porch extends from the fascia board which is about 8' off the ground, the height of the lean-to or porch at the post end is less than 8' due to the angle of the roof.
  8' Wide Lean-To (Usable Width is Approx. 7') SF $ 8.22
10' Wide Lean-To (Usable Width is Approx. 9') SF 8.54
10' Wide Porch with 4"x4" Vinyl Sleeves and Enclosed Ceiling
for a photo.
SF 12.37
6" Fluted Columns for Porch or Lean-to Roof. Choice of square or round, vinyl or aluminum. Includes bottom and top caps. EA 225.00
  Metal Roof
METAL ROOFING IS AVAILABLE ON ALL MODELS. Steel is installed over 7/16" OSB roof decking and tarpaper; purlins are attached and the steel is secured to same. Our competitors often attach steel directly to the rafters. 20-year mfg. limited warranty.
Determined by type of roof. Priced per square foot of roof  SF 1.93
  Deck
Second Level (Restricted to Models with Exterior Stairs) 
Add a second story 8'x8' Deck with Rail and Safety Balusters for a dramatic entrance to the second level. For an 8' wall downstairs. ea 1,283.00
Add a second story 8'x8' Deck with Rail and Safety Balusters for a dramatic entrance to the second level. For a 10' wall downstairs. ea 1,498.00
  Porch
Porch with Banisters (Safety Balusters and Rail) and Three 36" wide steps. Priced per square foot. 
Square Foot Price (width x length x 19.31) SF $ 19.31
2"x6" Pressure treated boards. Price is based on the porch not being more than two feet off the ground. Note: Add $94.00 to upgrade the 36" stairs to 48" wide steps.
  Vents
All Models are Equipped with Vents. The Following are either Additions or Upgrades.
12"x12" White Wall Louver Vent (Installed) ea $37.00
12"x18" White Wall Louver Vent (Installed) ea 45.00
22" Oval Vinyl Wall Louver ea 94.00
16"x24" Round Top Vinyl Wall Louver ea 90.00
18"x14" Rectangular Vinyl Wall Louver ea 68.00
Ridge Vent 4' Section ea 48.00
Other Sizes and Styles Available (Please Ask)
  Lap Siding
HardiPlank
Upgrade T1-11 Siding to Hardiplank Concrete Composite Board Lap Siding with either a Smooth Finish with a Bead or Cedar Texture: 50-Yr Warranty.
Double Wall Construction: Firstly, the building is wrapped in 7/16" OSB for strength and protected from the elements by a vapor barrier, as required by the James Hardi Company. Secondly, the Hardiplank is installed over the vapor barrier and OSB.
8' and 10' Wide Models. Square Foot Price SF $10.28
12' Wide Models.  SF 7.89
16' to 20' Wide Models SF 8.95
24' to 32' Wide Models SF 10.61
24' to 32' Wide Models with 12/12 Pitched Roof or Gambrel Roof (Excludes MAX Truss Attic) SF 12.80
  Stucco Board Siding 
4'x8' Sheets 
Hardi Company
Upgrade T1-11 Siding to Concrete Composite Board with a Stucco Texture: 50-Yr Warranty.
Single Wall Construction: Firstly, the studs (16" on center) are wrapped and, thus, protected from the elements by a vapor barrier, as required by the James Hardi Company. Secondly, the Hardiplank stucco Board siding is installed over the vapor barrier.
Square Foot Price.  Includes Hardy corners. SF $ 2.50
Square Foot Price for Models with Full Lofts SF $ 4.00
  Vinyl Siding
Upgrade T1-11 to Durable Vinyl Siding
Double Wall Construction: Vinyl siding is installed directly over a house wrap vapor barrier and strong 7/16" OSB siding. Prices include cornices (fascia boards), brick molding around doors, garage door trim, etc., therefore, no painting is required. Note: Darker tones of vinyl siding have the tendency to fade, hence, select only the very lightest of shades.
8' and 10'  and 12' Wide Models with 5/12 to 7/12 pitched roofs. Square Foot Price SF $ 10.60
16' - 32' Wide Models with 5/12 to 7/12  pitched roof. SF 6.98
8' and 10' and 12' Wide Models with either a Gambrel roof or a 8/12 to 12/12 pitch. Square Foot Price SF 10.79
16' - 32' Wide Models with 8/12 to 12/12 pitched roofs SF 10.87
  Vinyl Siding
Upgrade HardiPlank Lap Siding to Vinyl Siding
Double Wall Construction: Vinyl siding is installed directly over a house wrap vapor barrier and strong 7/16" OSB siding. Prices include cornices (fascia boards), brick molding around doors, garage door trim, etc., therefore, no painting is required. Note: Darker tones of vinyl siding have the tendency to fade, hence, select only the very lightest of shades.
8' and 10' Wide Models. Square Foot Price SF $ 1.65
12' Wide Models.  SF 1.49
16' - 20' Wide Models SF 1.38
  Bradley Cupolas
  Bradley Cupolas are the best designed, best built cupolas one can buy, yet at an affordable price.
Crafted from solid cedar and decked with either a long-lasting aluminum or copper roof, the cupola requires little or no maintenance (may be painted or stained). All Bradley Cupolas are equipped with an insect screen inside the louvers, allowing ventilation while helping to prevent insect infiltration. Note: Bradley Cupolas are not Available for 12/12 Pitched Roofs, as the Alpine and Ambrosia.
for Photos and Information - WOOD CUPOLAS.

for Photos and Information - VINYL CUPOLAS.

  Weathervanes
A Variety of Styles.
for photos, pricing and additional information.
  No Floor
Deduct the Bradley Floor When Building on Your Concrete Slab
8' and 10' Wide Models, Deduct Per Square Foot. SF $ -.83
12', 16' and 18' Models, Deduct SF (Width x Length) SF -1.32
  Upgraded Floors
For Models Equipped with Pressure Treated Floor Joists and Heavy Duty 3/4" Pressure Treated Plywood Floors, No Upgrades are Required and/or Recommended. Choose Either Home Advantage or Advantech Tongue and Groove flooring if You plan on Installing Vinyl.
No Upgrades are Required and/or Recommended. SF $ .00
Either 23/32"Home Advantage or equivalent Tongue and Groove Flooring (20-year Warranty). Priced per square foot of building floor (Length x Width). SF $1.10
  Insulated Floor
and Insect Barrier
3/4" Sheet of Styrofoam and Sheet Plastic Insect Barrier.
Styrofoam is one of the best insulating materials available. Example: A thin Styrofoam cup will insulate against a scalding cup of coffee. Moreover, moisture will not deteriorate Styrofoam. When insulating, and assuming that the interior of the building will also be insulated and finished, the pressure treated floor should be changed to 3/4" (actual 23/32") tongue and groove flooring. On the other hand, if you select a Bradley Specialty door and will only heat or cool the building at selected times, you may wish to retain the pressure treated flooring.
Insulation Only: Priced per square foot of building floor (Length x Width). SF $ 1.73
Insulation Plus 23/32", either Home Advantage or Advantech Type Tongue and Groove Flooring (20-year Warranty). Priced per square foot of building floor (Length x Width). SF $ 2.43
  Insulation  
SOLAR GUARD Radiant Insulation.

               SOLAR GUARD Radiant Insulation

Keep Your Building Cool with SOLAR GUARD. 
Solar Guard
is a high-quality, highly resilient fiber glass blanket insulation which offers excellent radiant insulating value along with noise reduction, an attractive appearance, and vapor retardation.

Johns Manville's unique space-saving compression process allows a thermal blanket only 1/4" thick. The space age product is faced with two choices of vapor retarders: (1) aluminum facing on both sides, which is highly reflective and gives a bright metal surface; and (2) an aluminum facing on the back and a white facing on the front (shown above); the latter cuts down on the reflective aspect and is more conducive to a workplace environment.

FEATURES AND BENEFITS

  • Attractive appearance
  • Vapor Retardation
  • Noise reduction
  • Odor free
  • Does not promote or accelerate corrosion
  • Does not breed or promote bacteria, fungi or vermin
R-10  Aluminum facing on back and white facing on front (recommended when not finishing the interior) SF 0.79
  Fiberglass Insulation
for Walls and Ceiling
R13 Utility Fiberglass Insulation for 8' Sidewalls
Kraft Faced with Moisture Barrier for 8 ' Sidewalls. Roof, Gable ends, Ceilings, and Rafters are Additional.
Walls priced per square foot of floor (Length x Width). SF $ 1.27
Ceiling priced per square foot of floor (Length x Width). SF $1.44
  Vinyl Lattice
Tuff Built Vinyl Lattice for Buildings with a Wood Floor
Priced per linear foot of building (all sides). Up to 24" from Ground Level. LF $3.80
Priced per linear foot of building (all sides). Up to 48" from Ground Level. LF $6.33
  Caulking, Priming
and Painting 
Please Ask for a Quote.
The building must be painted or stained within 60 days of completion or your Bradley warranty will be voided.
  Building Permit 
The Customer is Responsible for Pulling a Building Permit if Applicable, and Abiding by any Subdivision Covenants.
Some counties, as Cobb, do not require a building permit if the structure costs less than $3000.00. Nevertheless, there are setback requirements; hence, you should not build too close to a neighbor's property. For information, call your county's information number; they will direct you to building and zoning.
   Disclaimer
  Prices are subject to change without prior notice. All sizes are approximate. Special discount sale cannot be combined with any other offer. Not responsible for typographical errors.
 


Bradley
Lawn and Garden Buildings

The benchmark of quality & affordability.


CONTACT INFORMATION:


Hours of Operation:  8:00 AM to 6:00 PM Monday through Friday. Closed weekends. Leave a message anytime.
   
Tel: 
Your telephone goes here.

Fax:
Due to unsolicited faxes, please write or call for our fax line.
Mailing Address
Your business and/or home office address goes here.
 
Owner and General Contractor
         
Owner information goes herre.
 
Electronic Mail
General Information, Sales, and Support: Either fill in the Contact Request Form conveniently located at the bottom of the page, or email us by clicking on the symbol below: 

Sales@BradleyBuildings.com

 

 


   Last modified: August 26, 2015